Tracerouteinterface

2021年6月11日 — -i interface, Specifies the interface through which traceroute should send packets. By default, the interface is selected according to the ...

2015年12月10日 — ... interface: traceroute -i <interface> <host>. If this doesn't work, out can add a specific route to the host you want to trace via the gateway ...

The traceroute command will determine the length of the probe packet based on the Maximum Transmission Unit (MTU) of the outgoing interface. The UDP probe ...

The Traceroute command (tracert on Windows) is a small network diagnostic software that you have built-in on your device and servers for tracing the route, ...

Traceroute is a tool for displaying the route taken by a packet from an IP network on their way to a given host. When a traceroute is performed the packets ...

-i interface Specifies the interface through which traceroute should send packets. By default, the interface is selected according to the routing table. -s ...

2013年7月15日 — The standard traceroute command seems to be able to do it (allow selection of outgoing interface, source IP), but it does not allow selection of ...

traceroute tracks the route packets taken from an IP network on their way to a given host. It utilizes the IP protocol's time to live (TTL) field and attempts ...

2022年10月4日 — interface Serial0 ip address 10.0.2.23 255.255.255.0 no fair-queue clockrate 64000 ! interface Serial1 ip address 172.16.0.12 255.255.255.0 !

2023年7月31日 — 本文件說明如何使用延伸ping 和延伸traceroute 命令。